Compuprint 10200 Programmer Manual User Manual download pdf (Page 107)

Commands

103

DC4 DC4 ESC @

Re-initializes the printer. (Compuprint)

ASCII Code DC4 DC4 ESC @

Hexadecimal Value 14 14 1B 40

Decimal Value 20 20 27 64

This command resets the printer mode and clears the buffer of printable data.

DC4 DC4 ESC J

Sets amplification factor. (Compuprint)

ASCII Code DC4 DC4 ESC J

h v

Hexadecimal Value 14 14 1B 4A

h v

Decimal Value 20 20 27 74

h v

This command sets the required amplification factor to be applied to the current font.

It is the horizontal amplification factor, the value range is 1 to 4. It is applied to the basic

symbols.

It is the vertical amplification factor, the value range is 1 to 4.

0 values for either h and v parameters keep the related current amplification factor unchanged.

The internally available symbol’s amplification algorithms support the following character

attributes, that may be selected by means of the available control sequences within the currently

active emulation: double width, double-height, emphasized, double strike, subscript, superscript,

italics, proportional, compressed.

Doublewide and double-high attributes must be lower than 2.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 233 234

No comments

Compuprint 10200 Programmer Manual User Manual Page 107