Compuprint 2056 Quick Start User Manual download pdf

MAN10xxx-01 i

Ribbon knob

Ribbon nip

Ribbon guide slice

Print head

Quick Installation Guide

Unpacking and Checking

Check the following items in the packing box, if any of these items is

missing, please contact your dealer.

A: Printer

B: Ribbon cartridge

C: Driver CD (Including user's manual and driver)

D: Power cord

E: Facility user’s guide

Removing the Protective Materials

1. Open the packing box, take out the printer.

2. Save all the original packing materials, so that it can be used when

transporting the printer.

Front and Rear Views with components

Choosing a Place for the Printer

When selecting a place to set up your printer, choose a convenient

location that provides the following:

1. A flat, stable surface and a adequate space around the printer.

3. Moderate environmental conditions. Select a cool, dry area and

protect your printer from direct sunlight, excessive heat, moisture, or

dusty.

4. Appropriate power source. Make sure you use a grounded outlet; do

not use an adapter plug

Installing the Ribbon Cartridge

1. Before installing the ribbon cartridge, make sure the printer is turned

off and open the window.

2. Put the gap adjust lever to the highest position.

3. Slide the print head to the middle of the printer.

4. Please take out the ribbon cartridge from the box, hold the bottom side

of the ribbon nip and then take out the ribbon nip

5. Hold both sides of the ribbon cartridge and aim the buckles at the

mounting slots of the printer, then press it firmly until it locks in place. Put

the ribbon nip between print head and ribbon guide slice.

6. Turn the ribbon knob in the direction of the arrow to remove any slack

from the ribbon so it is easier to install.

7. Slide the print head from side to side several times to make sure the

ribbon core is installed in the right place.

8. Please put the gap adjust lever to the original place and close the

window after the ribbon cartridge is installed

Note: 1. When your printing becomes faint, you need to replace the

ribbon cartridge. Otherwise, the print quality would be affected and

the print head may be damaged.

2. To remove the old ribbon cartridge, first make sure the power is

turned off, move the print head to the center of the printer. Then

hold both sides of the ribbon cartridge and lift it out of the printer.

Install a new one follow the above steps.

3. Please use the Compuprint PRKN120 ribbon cartridge only.

Manufacturer will not honor warranty when using unauthorized

ribbon cartridge.

Connecting the Power Cord

1. Make sure the printer’s power is turned off. (The pressed down side

on the power switch with “O” mark denotes the printer is off.)

Paper feed knob

Ribbon cartridge

head

Window

Control panel

Gap adjust lever

USB

interface

Tractor

Power switch

Paper guide

slide

Paper feed

knob

Rear cover

Power supply

inlet

Serial

USB

Ethernet

interface

Window

Print head

Ribbonnip

Ribbon cartridge

Ribbon

Ribbon knob

1 2

Summary of Contents

Page 1 - Quick Installation Guide

MAN10xxx-01 i Ribbon knob Ribbon nip Ribbon guide slice Print head Quick Installation Guide Unpacking and Checking Check the follow

Page 2 - MAN10xxx-01 ii

MAN10xxx-01 ii 2. Make sure the voltage required by the printer matches that of your electrical outlet. 3. Plug one end of the power cord into the pr

Comments to this Manuals

No comments

Compuprint 2056 Quick Start User Manual

Browse online or download User Manual for Printers Compuprint 2056 Quick Start. Compuprint 2056 Quick Start User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Printers Compuprint 2056 Quick Start