Compuprint 3046 Installation User Manual download pdf (Page 6)

Windows Printer Driver Installation

To print from Windows, you need to install the driver. Insert the CD in the CD drive and run

setup.exe. You should choose corresponding printer type to suit your printer.

Notices

Security and Environment

1. Printer must have grounded power. Voltage: 100V~240V, frequency: 50Hz/60Hz.

2. Your printer must not be exposed to direct sunlight, extreme heat, humidity or dust.

3. Don’t plug the printer, computer system, large motor or the other high power

consumption machines in the same power loop; otherwise the voltage will not be stable.

4. The whole computer system should be kept away from the interference, such as high-

power sound box or radio mainframe.

5. Use the power outlet with ground line.

6. Don’t use the power controlled by wall switch or auto-timer, for the sudden power-break

may damage the information in the storage of computer and printer.

7. The whole computer system should be kept away from electromagnetic interference, such

as loudspeaker or wireless telephone.

Before using the printer

1. Make sure the printer power switch is in the off position (O) before inserting the power

plug into the grounded power outlet.

2. Remove all the transportation protection material according to the notice card before

starting printer.

3. When you switch off the printer, do NOT switch it back on until all of the Operator Panel

indicators are turned off. Failing to do so will damage the printer.

4. Choose a suitable location for the printer. Consider the following points when you choose

a location for your printer:

Put the printer on a stable surface.

Î The distance between the printer and the host computer must not exceed the length of

the interface cable.

Î Leave sufficient space around the printer for operation and maintenance

4 The Accessory CD

The accessory CD enclosed with this printer includes the following:

1 2 3 4 5 6 7

No comments

Compuprint 3046 Installation User Manual Page 6