84
Example Configuring
The following is an example Configuration procedure, in which we will alter the Factory
settings: the font is changed from Draft to Orator and the horizontal pitch is changed from 10 cpi
to 17.1 cpi in DEC protocol for Macro 2.
1. Press the
Set-Up
button to put the printer in Set-Up mode.
MACROS is displayed.
2. Press the ↓ button.
The display shows MACRO 1.
3. Press the → button.
The display shows MACRO 2.
4. Press the ↓ button.
The display shows PROTOCOL.
5. Press the → button until FONT is displayed.
6. Press the ↓ button.
The display shows * Draft.
7. Press the → or ← button, until the display shows Orator.
8. Press the
Sel/Save
button to select this font.
An asterisk is displayed to indicate that the Value has been selected.
9. Press the ↑ button to return to the Options level.
The display shows FONT.
10. Press the → or ← button, until the display shows DEC MODE.
11. Press the ↓ button to pass over to the value setting for the DEC defaults, the display shows
HORIZONTAL PITCH.
Comments to this Manuals