Compuprint 6314 User Manual download pdf (Page 26)

Home
Compuprint
Printers
6314
User Manual

Download
Share

Sharing
Add to my manuals
Print

Compuprint 6314/6414 - User Manual

2.3.2 Label Peel Off (Optional)

The printer can be set up to automatically peel labels off the backing liner and dispense them one at

a time while rewinding the liner. This configuration requires routing the liner through the rollers on

the Peel/Tear assembly and the use of the printer’s internal rewinder.

- Open the media cover.

- Remove the tear bar assembly.

- To install the label peel-off system, remove the two screws on the back of the tear bar assembly

and tear blade by rotating the tear off plate. Replace the cutting blade with the peel-off system.

Fig. 19 – Removing the cutting blade

- Thread the liner over the peel bar and then through the slot of the front plate just below the

platen roller and into the printer.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 77 78

Compuprint 1
6314/6414 1
Safety Instructions 2
Contents 3
1 INTRODUCTION 6
1.3 Features 7
1.4.1 The Printing Process 8
1.5 Thermal Consumables 8
1.5.1 Media Selection 8
1.5.2 Ribbons 9
1.6 Thermal Features 9
1.6.1 Emulations 9
1.6.2 Hardware Options 9
1.7 Setting Up The Printer 10
1.7.1 Unpacking The Printer 10
1.7.2 Check List 11
1.8 Installation 12
Fig. 7 – Guide hole 15
2 OPERATION 17
2.1 Using The Printer 17
2.2 Loading Media And Ribbon 18
2.2.4 Loading The Ribbon 24
2.3 Printer Options 25
2.4 Printing Adjustments 31
Sequence Of Operations 32
Calibration 33
2.5 Cleaning 34
2.5.1 General 34
2.5.2 Print Head 34
3 CONFIGURING THE PRINTER 36
3.1 Control Panel 36
3.1.1 Function Keys And LEDs 37
3.2 Configuring The Printer 38
3.2.1 Overview 38
Fig. 29 – Menu Map 39
3.2.2 Menu Navigation 40
3.3 File Menu 43
3.3.2 Others Parameters 45
3.4 Enabling and Modes 46
3.4.1 Emulation Selection 46
3.4.2 Set Printer Mode 47
3.4.3 Paper Sensor Mode 47
3.4.4 Print Method Mode 47
3.4.5 Password Selection 48
3.4.6 Power Up Configuration 48
3.4.7 Closing Head Action 48
3.5 Printer Settings 49
3.5.2 Backfeed Adjustment 50
3.5.3 Form Length Selection 50
3.5.6 Print Speed Selection 51
3.5.7 Slew Speed Selection 51
3.5.10 Cut Cycle Selection 52
3.5.11 Paper Rewinder Torque 52
3.5.14 Set Time And Date 53
3.6.1 Vertical Offset 54
3.6.2 Backfeed Offset 55
3.6.3 Reference Offset 55
3.6.4 Row Offset 55
3.6.5 Column Offset 56
3.6.6 Select Final Character 56
3.6.7 Control Codes 56
3.7.1 Set Format Prefix 57
3.7.2 Set Control Prefix 57
3.7.4 Resolution Mode 58
3.7.5 Label Length 58
3.8.1 X – Y Starting Point 59
3.8.2 Error Report 60
3.9 Diagnostic Menu 61
3.9.2 Paper Sensor Mode 62
3.9.3 Paper Sensor Control 62
3.9.5 Run Manual Adjustment 63
3.9.8 Counters Menu 63
3.11 Serial Interface 65
3.11.1 Baud Rate 65
3.11.2 Parity 65
3.11.3 Data Bits Number 66
3.11.4 Stop Bits Number 66
3.12 NIC Interface 67
3.12.8 Mail Server Address 69
3.12.11 Contact 69
3.12.12 Location 69
4 TROUBLESHOOTING 70
Table 5 – Troubleshooting 71
5 PRINTER SPECIFICATIONS 72
INTERFACES 73
EMULATIONS 73
LABEL SPECIFICATIONS 73
Table 15 – Options 74
Table 16 – Standards 74
6 CONFORMITY DECLARATION 75
6.1 EEC Regulations 75
6.2 FCC Part 15 Class A 75
7 SERIAL PORT WIRING 76
8 INDEX OF FIGURES 77
9 INDEX OF TABLES 78

Comments to this Manuals

No comments

Compuprint 6314 User Manual Page 26

Comments to this Manuals

Related products and manuals for Printers Compuprint 6314