Compuprint SP40 User Manual download pdf (Page 57)

The documents must all guarantee the following characteristics:

• Use paper matching the indicated characteristics.

• They must have well defined top and left edges, with a square angle tolerance of 0.1° on all edges.

• The paper must not have holes, perforations, folds or tears anywhere within the print area of the document.

• The radius on a corner of the form must be within 9.5 mm from the left or right edge.

• The form to be printed must not contain foreign material.

• Form opacity must be at least 75%. Forms with a lower opacity may cause feed errors.

• Never print on documents with metallic or hard plastic fasteners or staples, they may damage the printer.

Use only sewn passbooks.

• To get the maximum print contrast you should print on white or light colored paper. You may overstrike to

improve the low contrasting paper.

• It is preferable to use single and multiple documents with the fibre running in the insertion direction of the

printing unit.

• Recycled paper is permitted on principle.

• It is preferable to print on multiple forms with a narrow glue strip or top-gluing. The gluing must not cause

waving in the set of forms.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 63 64 65

No comments

Compuprint SP40 User Manual Page 57