Compuprint SP40 User Manual download pdf (Page 45)

Setup Parameter Values Description

LINE MODE LF=LF, CR=CR

CR=LF+CR

LF=LF+CR

LF&CR=LF+CR

If the printer receives a LF code (LF), it only performs a line feed. If

the printer receives a CR code (CR), it only performs a carriage

return.

If the printer receives a CR code (CR), it performs a carriage return

follow ed by a line feed. If the printer receives a LF code (LF), it

performs a line feed.

If the printer receives a LF code (LF), it performs a line feed

follow ed by a carriage return. If the printer receives a CR code

(CR), it only performs a carriage return.

If the printer receives a LF code (LF) or a CR code (CR), it

performs both a line feed and a carriage return.

WRAP MODE truncate,

autow rap

The data exceeding the line length are truncated (truncate) or

printed on the follow ing line (

autowrap).

SLASHED ZERO no, yes Selects the printing character for zero, w ith a slash (yes) or

w ithout (

no).

PRINT DIRECTION unidir., bidir., sw

control

Selects the printing direction of the print head: unidirectional

(

unidir.), bidirectional (bidir.) or selected via software (sw

control

EJECT ON FF no, yes Performs a form feed according to the selected page format (no)

or ejects a cut sheet loaded into the printer (

yes).

RESET WITH EJECT no, yes When the printer receives a reset command, if this item is set to

yes the paper inserted in the printer is ejected. If the item is set to

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 64 65

No comments

Compuprint SP40 User Manual Page 45