Compuprint 9060LA User Manual download pdf (Page 107)

103

For correct paper feeding, you must tell your printer which paper format you loaded into the

printer and which area you want to define for printing.

Form Length

The FORM LENGTH Option allows you to set the physical form length in inches or in number of

lines. Even if the logical definition of the form length changes according to interdependent

Option settings, the Value of the FORM LENGTH Option is not altered as a result. It is only

altered by software command.

–

The Factory setting for the FORM LENGTH Option is 11 inches (A) predetermined Value.

The other predetermined Values in inches are: 3, 3.5, 4, 5.5, 6, 7, 8, 8.5, A4 (11.6 inches),

12, 14 or 15 inches.

Each time you change the form length using a predetermined Value:

• The TOP MARGIN Option is set to Line #1

• The BOTTOM MARGIN Option is set to the maximum Value, according to the formula:

Bottom margin (Line #X = Form Length (inches) x Vertical pitch (lpi)

(unit conversion is automatic if you define the vertical pitch unit as lpcm).

–

The NUMBER OF LINES Sub-option gives you the possibility to define the logical form

length as a number of lines. This length comes then from the following formula:

Form length (inches) = Vertical pitch (lpi) x Number of lines

(unit conversion is automatic if you define the vertical pitch unit as lpcm)

The maximum authorized form length is 21 inches.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 176 177

No comments

Compuprint 9060LA User Manual Page 107