Compuprint 9060LA User Manual download pdf (Page 109)

105

Bottom Margin

The BOTTOM MARGIN Option gives you the possibility to set the bottom margin with the number

of the line (numbered from the top paper edge) where the printing actually stops for a given

page.

The setting of this Option depends on the setting of both the VERTICAL PITCH and the FORM

LENGTH Options (see the corresponding related sections in this chapter).

The Values range from the Value for TOP MARGIN to the Value for FORM LENGTH.

Top of Form

The TOP OF FORM Option is used to set the Top of Form position. See the print area definition,

in the "P

" section. This Option is useful when printing on preprinted forms, where a

precise positioning is required. The selectable Values range between 0/60 and 140/60 inches. The

Factory setting is 0/60 inch.

You can set the PAPER PATH Option to select the paper path used with a given Macro.

Remember that you can also select the paper path you want using the operator panel buttons.

This Option is available only if the

PATH AT POWER-ON

Option of the

INSTALLATION

Function is

set to From Macro. See "

Value Definition

Push-Front1

The paper is loaded using the tractor in Front1 position.

Push-Front2

The paper is loaded using the tractor in Front2 position (option).

ASF1, ASF2, ASF3

Paper is loaded using one of the ASF bins (option).

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 176 177

No comments

Compuprint 9060LA User Manual Page 109